Page 1 of 1
Printer setup dialogue
Posted: Mon Aug 25, 2003 1:27 am
by Craig_Williams_(Guest)
I am printing a report from Visual FoxPro using the controlfile, with a value of "?" in the RI_WPTR field. This displays the windows printer dialogue. If the user clicks on the advanced properties and selects a specific tray on the printer, and then attempts to print the report R&R errors with the message "RRWRUN.exe has generated errors and ...".__This problem only occurs on one of the printers on our network, and only occurs in one of our reports (we have several that are fine).__This report is not new, but we have never encountered a problem like this before.
=> RE: Printer setup dialogue
Posted: Mon Aug 25, 2003 8:53 am
by freitas
This may be off based, but look to see what the name of the printer is to the network. If I remember correctly, the name or alias can not be over 32 characters. If it is, then give it another alias name of less characters and try it again.
==> RE: Printer setup dialogue
Posted: Mon Aug 25, 2003 6:31 pm
by Craig_Williams_(Guest)
No luck there unfortunately, the printer name is "Xerox on AKSERVER3", only about 18 characters. We^ve had this printer for quite a while without this issue happening, so I suspect that the problem is caused by something that has changed in the report. The difficulty being, I can^t think what it would be.