Page 1 of 1
report printing very slowly
Posted: Fri Sep 07, 2001 4:26 am
by Thomas_(Guest)
Hello____When I^m printing a report over rrwrun, the printing is very slowly. The Report contains no picture, only text from a *.dbf file.__When I start printing, I see the r&r task in the taskline and then it takes a long time until the report will printing on the printer!!____Can anyone help me about this problem?____Thanks__Thomas
=> RE: report printing very slowly
Posted: Fri Sep 07, 2001 5:03 am
by kfleming
What type of printer? Is it local or network?__Does the problem occur with all reports?____Kathleen__R&R Support
==> RE: report printing very slowly
Posted: Fri Sep 07, 2001 6:13 am
by Thomas_(Guest)
It is slowly with local printer and network printer__the printers are "Brother HL-1030 series" and "Lexmark Optra S 1650 (MS)". When I print on the network- or localprinter from another workstation with the same software, the speed is normal.__Before a few weeks, the printing-speed was normal on all workstation.__the problem is now with all reports on one workstations. In the workstation with the problem, there is the whole report-designer istalled. But we are printing with the rrwrun only...____Thanks__Thomas__
===> RE: report printing very slowly
Posted: Sun Sep 09, 2001 8:33 am
by kfleming
My guess is that the problem is not caused by anything specific to R&R. You could try un-install/re-install of R&R to see if it makes any difference.__Is R&R really the only application that is slow?____Kathleen__R&R Support__