Page 1 of 1

Error 35: Unexpected Interrupt=000B

Posted: Tue Apr 02, 2002 8:08 am
by Garnett
I^m using using a program which was written in Paradox 4.5 and Report Writer 4 under windows 95. It worked fine until I moved it to a new machine. All the reports works except for 3. The reports are called from a Paradox script. The error I receive is:__Error: Unexpected Interrupt=000B in RPRun.exe at 14E7:02B5 code=0344 ss=1687 ds=1687 es=1687 ax=0346 bx=7d7e cx=0346 dx=5400 sp=7d46 bp=7d58 si=7d89 di=4241.__Any clues on what is causing this and how to rectify it. All reports worked fine on the old machine and I have limited the new machine to 32meg RAM and partioned the drive as 1 gig.____ __

=> Error 35: Unexpected Interrupt=000B

Posted: Tue Apr 02, 2002 8:46 am
by kfleming
Since we have not shipped this product for many years, my recall of this condition is reasonably vague other than it has to due with a problem using the protected mode runtime. Can you run these reports on the problem machine using RP.EXE?____Kathleen__R&R Support

==> RE: Error 35: Unexpected Interrupt

Posted: Tue Apr 02, 2002 9:43 am
by Garnett
>Since we have not shipped this product for many years, my __>recall of this condition is reasonably vague other than it __>has to due with a problem using the protected mode runtime. __>Can you run these reports on the problem machine using __>RP.EXE? __>__>Kathleen __>R&R Support ____Yes when called from RP.EXE it does work. Is there a limit to the maximum RAM that RP will use. I asked this as the first problem I had when printing was traced to Paradox4.5 being able to handle the amount of memory hence we cut it down to the 32meg and repartioned the drives to something more acceptable to it ____