Installation of R & R 6.5

Meeting place for R&R customers and clients to share tips and ideas. Post your questions, messages or problems here.
Post Reply
ISTEWART_(Guest)
Posts: 3
Joined: Tue Oct 10, 2017 12:44 pm

Installation of R & R 6.5

Post by ISTEWART_(Guest) » Wed Oct 31, 2001 10:22 am

Does anyone have a copy of the installation instructions for R & R 6.5 for xbase, or can they give me instructions on how to set up and install. We have just bought a new copy but there does not seem to be setup or install files. am i missing something____Can someone assist thanks

kfleming
Posts: 5795
Joined: Tue Oct 10, 2017 12:44 pm

=> RE: Installation of R & R 6.5

Post by kfleming » Wed Oct 31, 2001 11:09 am

There should be a SETUP.EXE on disk 1.______Kathleen__R&R Support

ISTEWART_(Guest)
Posts: 3
Joined: Tue Oct 10, 2017 12:44 pm

==> RE: Installation of R & R 6.5

Post by ISTEWART_(Guest) » Wed Oct 31, 2001 12:02 pm

Kathleen all that is on disk 1 is rrusers.dat!. what else am i missing?

kfleming
Posts: 5795
Joined: Tue Oct 10, 2017 12:44 pm

===> RE: Installation of R & R 6.5

Post by kfleming » Wed Oct 31, 2001 8:45 pm

There should be 55 files on disk 1 and I believe that there are 4 disks in the install set.______Kathleen__R&R Support

ISTEWART_(Guest)
Posts: 3
Joined: Tue Oct 10, 2017 12:44 pm

====> RE: Installation of R & R 6.5

Post by ISTEWART_(Guest) » Thu Nov 01, 2001 4:48 am

This is a brand new set of disks, straight out of the box.__There is 1 file on disk 1, 1 on disk 2, 29 on disk 3 and 17 on disk 4. Is there some way i can get the missing files.

kfleming
Posts: 5795
Joined: Tue Oct 10, 2017 12:44 pm

=====> RE: Installation of R & R 6.5

Post by kfleming » Thu Nov 01, 2001 5:19 pm

If you want to send me your email address, I will zip and forward the missing files.______Kathleen__R&R Support__mailto: kfleming@livewarepub.com

nevzatkanbur
Posts: 0
Joined: Thu May 03, 2018 12:13 pm

======> RE: Installation of R & R 6.5

Post by nevzatkanbur » Mon Nov 05, 2001 7:04 am

Kathleen thanks for the file^s, but now i am getting the error__"File copy operation failed - incorrect number of bytes written to disk - source file or destination disk may be corrupted - use ChkDsk. Source G:RRW.HL_ Dest C:RRWRRW.HLP" This is after i put in disk two. Am i missing some files again. All that is on disk 2 is RRW.HL_ Which is 1.26mb ____This install is being carried out over a network. ____

Post Reply