RI_WPTR

Meeting place for R&R customers and clients to share tips and ideas. Post your questions, messages or problems here.
Post Reply
jackhellmuth
Posts: 6
Joined: Tue Oct 10, 2017 12:44 pm

RI_WPTR

Post by jackhellmuth » Tue Jul 01, 2003 5:00 pm

How should one set the value of RI_WPTR for a control file when the network printer name contains a space? I have tried single and double quotes around the name without success. Renaming the printer is not an option.
Top
kfleming
Posts: 5795
Joined: Tue Oct 10, 2017 12:44 pm

=> RE: RI_WPTR

Post by kfleming » Tue Jul 01, 2003 5:27 pm

No quotes required. Just the name.____Kathleen__R&R Support
Top
jackhellmuth
Posts: 6
Joined: Tue Oct 10, 2017 12:44 pm

==> RE: RI_WPTR

Post by jackhellmuth » Wed Jul 02, 2003 8:00 am

Just using the name results in the message, "Cannot match printer or port in control file."
Top
kfleming
Posts: 5795
Joined: Tue Oct 10, 2017 12:44 pm

===> RE: RI_WPTR

Post by kfleming » Wed Jul 02, 2003 11:24 am

[updated:LAST EDITED ON Jul-02-03 AT 11:25 AM (EST)]What version of R&R and what is the name of the printer?__If it is the default printer, then you could alternatively use DEFAULT in RI_WPTR.____Kathleen__R&R Support
Top
jackhellmuth
Posts: 6
Joined: Tue Oct 10, 2017 12:44 pm

====> RE: RI_WPTR

Post by jackhellmuth » Wed Jul 02, 2003 4:57 pm

[updated:LAST EDITED ON Jul-02-03 AT 04:59 PM (EST)]Version is 10+ (xBase). Name of printer is \fbc-prtsvcISS-Toshiba Color
Top
John_Lewis_(Guest)
Posts: 18
Joined: Tue Oct 10, 2017 12:44 pm

=====> RE: RI_WPTR

Post by John_Lewis_(Guest) » Wed Jul 16, 2003 2:44 pm

Hi:____Have you tried simply using the printer name with out the port prefix e.g. ISS-Toshiba Color____Regards____John
Top
Post Reply

Return to “R&R ReportWorks Users”